TM9-2350-261-20-2
N O T E
Two washers (1) are the maximum used.
If two washers are removed, two will be
installed.
4.
5.
6.
7.
8.
9.
10.
Remove cotter pin (2), nut (3), and
washer(s) (1),from differential oil
pump (4). Discard cotter pin.
Discard key washers.
Remove gasket (8) from
Discard gasket.
Remove two screws (5), key washers (6),
and oil pump (4) from transfer gearcase (7).
oil pump (4).
Remove key (9) and retainer (10) from oil
pump (4).
Remove elbow (11) and packing (12) from oil
pump (4). Discard packing.
Remove quick disconnect coupling half (13)
and packing (14) from elbow (15). Discard
packing.
Remove elbow (15), nut (16), retainer (17),
and packing (18) from oil pump (4). Discard
packing.
BOTTOM ACCESS OPENING
GO TO NEXT PAGE
21-3