TM 9-2350-261-20-2
112. If NBC unit is installed, connect circuit
415 lead (1) to NBC unit.
113. Connect circuit 402 lead (2) to personnel
heater wiring harness.
114. Connect circuit 400 lead (3) to personnel
heater control box.
115.
116.
117.
Install six clamps (4) and circuit 48 lead
(5) on six weldnuts (6). Secure with six
screws (7).
Install two new lockwashers (8), circuit 48
capacitor (9), and ground lead (10) on
weldnut (11). Secure with screw (12).
Install circuit 48 lead (5) on bracket (13).
Secure with four screws (14) and
nuts (15).
12-98