TM 9-2350-261-20-2
138.
139.
140.
141.
Connect circuit 402 lead (1) to personnel
heater fuel pump (2).
Install two clamps (3), one new Iockwasher
(4), circuit 30 lead (5), and ground lead (6)
on two weldnuts (7). Secure with two
screws (8).
Install new lockwire (9), one screw (10),
new lockwasher (11), and ground lead 16)
on left fuel quantity sending unit (12).
Connect circuit 30 lead (5) on sending
unit (12).
142.
143.
144.
145.
connect circuit 509 lead (13) to
buzzer (14).
Install one new lockwasher (15), two
clamps (16), and circuits 30 and 509 leads
(5 and 13) on two weldnuts (17). Secure
with two screws (18).
Install wiring harness (19) on seven
cradles (20). Secure with seven cradle
clips (21).
Connect circuit 509 and 509Aconnector
(22) to buzzer switch (23).
12-102
