131,
132.
133.
134.
Pull circuits 21, 22, 23, 24, and 451 leads
135.
(1, 2, 3, 4, and 5) through opening in
floor transverse beam (6).
136.
Install clamp (7), two new lockwashers (8),
trailer wiring harness ground lead (9), and
rear main wiring harness (10) on weldnut
(11). Secure with screw (12).
Connect circuit 451 lead (5) to rear
pump (13).
Connect circuits 21, 22, 23, and 24
(1, 2, 3, and 4) to trailer wiring
harness (14).
137.
bilge
leads
TM 9-2350-261-20-2
Install clamp (15) on wiring harness (10).
Secure with screw (16) and nut (17).
Install clamp (15) and wiring harness (10)
on transverse beam (6). Secure with two
screws (18) and nuts (19).
Install new lockwasher (20), clamp (21),
and wiring harness ( 10) on weldnut (22).
Secure with screw (23).
GO TO NEXT PAGE
12-101
