TM 9-2350-261-20-2
INSTALL
83. Install main rear wiring harness (1) in
earner.
84. Connect circuits 38, 38B, and 38C leads
(2, 3, and 4) to ramp door switch (5).
N O T E
Do steps 85 and 86 for M577A2 only.
85. Install two new grommets (6) in battery
box (7).
86. Install circuits 6 and 48B leads (8 and 9)
through two new grommets (6). Connect
leads to terminal (10) with screw (11)
nut (12).
and
N O T E
Do steps 87 thru 88.2 for M1068 only.
87. Install two new grommets (13 and 14) in
battery box (7).
88. Install circuit 6 lead (8), and circuit 31 lead
(15) through grommet (13).
88.1.
88.2.
Install circuit 48B lead (9) through
grommet (14).
Connect circuit 6 lead (8), circuit 48B lead
(9), and circuit 31 lead (15) to termina]
(10) with screw (11) and nut (12).
12-94
Change 3
