TM 9-2350-261-20-2
INSTALL
3. Place toggle switch (1) on rear of instrument
panel. Secure with two new lockwashers (2)
and screws (3).
NOTE
Make sure circuit leads are connected to
correct switches.
foldouts.
See wiring diagram
4. Connect circuit leads (4) to rear of toggle
switch (1).
FOLLOW-THROUGH STEPS
1. Connect battery ground lead (page 13-2).
3. Check for proper operation of switch.
2. Turn MASTER SWITCH ON see your -10).
4. Turn MASTER SWITCH OFF (see your -10).
END OF TASK
11-8
Change 4
