TM 9-2350-261-20-1
INSTALL
6.
7.
8.
Apply sealing compound to cleaned external
threads of hoses and fittings.
Install two elbows (1 and 2) in fuel
pump (3).
Place fork (4) on pump drive shaft (5). Place
new gasket (6) and pump (3) on engine.
9.
10.
11.
12.
Secure pump (3) to engine with three
screws (7) .
Connect primary fuel filter supply hose (8)
to elbow (2).
Connect secondary fuel filter supply hose
to elbow (l).
Connect supply hose at quick disconnect
coupling (10) .
(9)
FOLLOW-THROUGH STEPS
1. Connect battery ground lead (page 13-2).
4. Stop/shutdown engine (see your -10).
2. Start Engine (see your -10). Check for leaks.
5. Install power plant rear access panels and
support (page 24-27 or 24-29).
3. Raise and lock ramp (see your -10).
END OF TASK
6-122