TM 9-2350-261-20-1
35.
36.
37.
38.
Install return hose (1) and six clamps (2) On
three weldnuts (3). Secure with three screws
(4) and new lockwashers (5).
Secure guard (6) to hull with two screws (7)
and new lockwasher (8).
Secure return hose (1) and supply hoses
(9 and 10) together with three new
straps (11).
Secure two guards (12) to hull with five
screws (13) and new lockwashers (14).
39.
40.
41.
42.
43.
44.
Secure bulkhead elbow (15) to power plant
rear bulkhead with nut (16).
Connect tube assembly (17) to bulkhead
elbow (15).
Connect elbow (18) to tube (17).
Connect quick disconnect half (19) to
elbow (18).
Connect return hose (20) to bulkhead
elbow (15).
Connect quick disconnect half (21) to quick
disconnect half (19) at power plant rear
bulkhead.
GO TO NEXT PAGE
6-47
