TM 9-2350-261-20-1
7.
8.
9.
Remove four screws (1), lockwashers (2),
and eight clamps (3) from weldnuts. Discard
lockwashers.
Remove clamps (3) from fuel supply
hose (4).
Disconnect fuel supply hose (4) from tee (5).
NOTE
If personnel heater is installed, plug (6)
will be replaced by a hose.
10. Remove
11. Remove
12. Remove
13. Remove
plug (6) from valve (7).
valve (7) from elbow (8).
elbow (8) from tee (5).
tee (5) from fuel supply tube (9).
14.
15.
16.
17.
18.
19.
Remove three screws (10), lockwashers (11),
and six clamps (12) from weldnuts. Discard
lockwashers.
Remove clamps (12) from fuel supply
tube (9).
Remove four screws (13), lockwashers (14),
and guard (15) from sponson. Discard
lockwashers.
Disconnect fuel supply tube (9) from
nipple (16).
Remove nipple (16) from fuel supply
hose (17).
Remove fuel supply hose (17) from
adapter (18).
6-48.4
Change 2
