TM 9-2350-261-20-1
43.
44.
45.
Install washer (1) and nut (2) on transfer
gearcase left mount.
Tighten nut (2) to 75-80 lb-ft
(102-108 N•m) torque. Use torque wrench
(Item 96) and socket wrench set.
Install clip pin (3) on headed pin
transfer gearcase right mount.
(4) at
47. Install tachometer cable (6) on tank with
clamp (7), clamp (8), washer (9) nut (10)
and screw (11).
48. Connect tachometer cable (6) to engine
adapter (12).
46. Connect two fuel hoses at couplings (6).
49. Connect ramp hydraulic lines at cou-
plings (13) (M741A1 only).
M741A1 ONLY
GO TO NEXT PAGE
5-19
4
