R E P L A C E F R O N T E N G I N E M O U N T

C H A P T E R 4 E N G I N E - R E L A T E D C O M P O N E N T S M A I N T E N A N C E

R E P L A C E E N G I N E O I L F I L T E R E L E M E N T A N D P A R T S

TM-9-2350-261-20-1 Carrier Personnel Full Tracked Armored M113A2 2350-01-068-4077 Carrier Command Post Light Tracked M577A2 2350-01-068-4089 Manual
Page Navigation
617

R E P L A C E F R O N T E N G I N E M O U N T INITIAL SETUP Tools: Personnel Required: General Mechanics Tool Kit (Item 30, App D) Unit Mechanic Torque Wrench (Item 96, App D) References: Materials/Parts: See your -10 Antiseize compound (Item 4, App C) Sealing compound (Item 46, App C) Equipment Conditions: Key washer (2) Engine stopped/shutdown (see your -10) Carrier blocked (see your -10) REMOVE Remove two screws (1), key washers (2), and 1. cap (3), from base (4) on engine (5). Discard key washers. 2. Remove power plant (page 5-11). 3. Remove two self-locking bolts (6), washers (7), from base (4) on engine (5). Remove base (4) from engine (5). INSTALL 4. 5. 6. 7. 8. Apply a thin coat of antiseize compound and sealing compound to cleaned threads of two screws (1) and self-locking bolts (6). Install base (4) on engine (5) with two self- locking bolts (6) and washers (7). Install power plant (page 5-11). Install cap (3) on base (4) with two new key washers (2) and screws (l). Tighten two screws (1) to 30-35 ft-lb (41-48 N•m) torque. Tighten two self-locking bolts (6) to 90-100 ft-lb (122-135 N•m) torque. Use torque wrench. END OF TASK 4-2 TM 9-2350-261-20-1

Privacy Statement
Press Release
Contact