TM 9-2350-261-20-1
FIELD CURRENT
1.
2.
3.
4.
5.
6.
7.
8.
9.
Install current probe around circuit 1 lead of generator
to regulator cable.
Point arrow on current probe toward generator.
Set test select switches to 01.
Press and release test button.
When PASS appears, set test select switches to 90.
Press and release test button.
Raise engine speed to 1000 to 1200 rpm and read rpm
display.
Stop engine (see your-10).
Is current below 6 amps?
YES
1. Check continuity of cables from regulator to generator.
2. If cables are ok, go to charging system malfunctions
(page 3-55).
3. Verify no faults found.
NO
1. Go to charging system mal-
functions page 3-55).
I 2. Verify no fault found.
3-258
Change 1
