TM 9-2350-261-20-1
1. Remove cable W45 plug P13 (1) from Power Control
Enclosure jack J33 (2).
2. Turn MASTER SWITCH to ON (see your -10).
3. Set JTIDS switch (3) on Power Control Enclosure panel
to ON (see TM 11-7010-256-12&P).
4. Measure voltage between sockets A and B of J33 (2).
5. Does multimeter read 22 volts DC or more?
3-226.40
Change 3
GO TO PAGE 3-226.42
