TM 9-2350-261-20-1
1. Remove cable W7 plug P10 (1) from Power Control
Enclosure jack J30 (2).
2. With AC power accepted, set AC LEFT OUTLETS
switches (3) on Power Control Enclosure panel to ON
(see TM 11-7010-256-12&P).
3. Measure voltage between sockets A and B of jack J30
(2) . Repeat measurement for sockets C and D.
4. Does multimeter read 110 volts AC or more for both
measurements?
3-226.24
Change 3
GO TO PAGE 3-226.26