TM 9-2350-261-20-1
1. Remove engine harness plug (1) from front main
harness jack (2) at earner bulkhead.
2. Is TRANS OIL HI TEMP indicator still on?
YES
1. Remove front main harness circuit 327/27G
plug (1) from TRANS OIL HI TEMP indicator (2).
2. Measure resistance between front main harness
circuit 327/27G plug (1) circuit 327 pin and
ground.
8. Does multimeter read 0 ohms?
1
1. Repair engine harness
(page 14-3).
2. Verify no faults found.
1. Replace TRANS OIL HI
TEMP indicator assembly
(page 11-22).
2. Verify no faults found.
1. Shorted front main harness circuit 327.
2. Notify your supervisor.
3-155