TM 9-2350-261-20-1
1. Remove front main harness circuit 27J/34 plug (1)
from ENGINE OIL LOW PRESSURE indicator
assembly jack (2).
2. Measure voltage between circuit 27J plug pin and
ground.
3. Does multimeter read less than 17 volts?
YES
1. Remove instrument panel for access (page 11-2).
2. Remove front main harness circuit 27F plug (1)
from instrument panel cable assembly circuit 27F
jack (2).
3. Measure resistance between front main harness
circuit 27J plug and circuit 27F plug (1).
4. Does multimeter read 0 ohms?
1. Replace ENGINE OIL
LOW PRESSURE indicator
I
1. Repair instrument panel cable assembly circuit 27F
(page 14-9).
2. Verify no faults found.
I
assembly (page 11-22).
2. Verify no faults found.
I
1. Repair front main harness
circuit 27F/27J
(page 14-3).
2. Verify no faults found.
\
-------
3-151