TM 9-2350-261-20-1
1. Remove instrument panel for access. See task:
Remove instrument panel mounts and ground leads
(page 11-2).
2. Remove circuit 27B plug (1) from coolant temper-
ature indicator (2).
3. Turn MASTER SWITCH to ON.
4. Measure voltage between circuit 27B plug (1) pin
and ground.
5. Does multimeter read at least 17 volts?
I
Y ES
1. Turn MASTER SWITCH to OFF.
2. Remove engine harness plug (1) from front main
harness jack (2) at carrier bulkhead.
1. Repair faulty special pur-
pose cable circuit 27B
I
(page 14-9).
Z. Verify no faults found.
1. Repair engine harness
circuit 33 (page 14-3).
2. Verify no faults found.
3-146
3. Measure resistance between engine harness plug (1)
pin E (3) and ground.
4. Does multimeter read 0 ohms?
