TM 9-2350-261-10
CAUTION
Track pin threads are easily
damaged. Do not force track pin.
Tap track pin lightly with ham-
mer.
WARNING
Always wear eye
p r o t e c t i o n w h en
using a hammer.
Eye injury may re-
sult if metal chips
contact eyes
3. Drive track pin part way out
with short end of drive pin
punch. Use hammer. Remove
drive pin punch.
4. Drive track pin all the way out
with long end of drive pin punch.
Keep short end up and remove
drive pin punch.
5. Remove track shoe from track.
Use crowbar.
6. If removed shoe is not
serviceable, discard shoe. If
removed shoe is serviceable,
install the pin and nuts in the
shoe. Stow shoe on left front of
carrier just above the track. Use
1/2 inch drive socket handle and
3/4 inch socket.
3 - 3 0
Change 5