I N S T A L L T R A C K S H O E
1. Unstow a spare track shoe from
left front of carrier. Use 1/2 inch
drive socket handle and 3/4 inch
socket.
2. Remove nut from track pin. Use
1/2 inch drive socket handle and
11/16 inch socket.
TM 9-2350-261-10
WARNING
Always wear eye
p r o t e c t i o n w h en
using a hammer.
Eye injury may re-
sult if metal chips
contact eyes
CAUTION
Track pin threads are easily
damaged. Do not force track pin.
Tap track pin lightly with ham-
mer.
3. Drive track pin part way out
with short end of drive pin
punch. Use hammer. Remove
drive pin punch.
4. Drive track pin all the way out.
Use hammer and long end of
drive pin punch.
GO TO NEXT PAGE
Change 5
3-31
