TM 9-2350-247-20-2
REPLACE PIVOT STEERING BRAKE ASSEMBLY (M548A1) -- Continued
0373 00
3.
Remove quick disconnect coupler (1) from elbow (2) and hose (3). Disconnect coupler and remove preformed packing
(4). Discard preformed packing.
NOTE
Screws must be used to hold both halves of brake together.
4.
Loosen six screws (5), washers (6), and two tubing straps (7) from differential and two brakes (8).
NOTE
Both brakes have similarly installed parts. Lift each brake from differential to disassemble it.
5.
Remove elbow (2) from tube (9). Loosen nuts on brake crossover tube (10). Remove tube (10) from inlet tee (11) and
elbow (12).
6.
Remove inlet tee (11) and preformed packing (13) from brake (8). Discard preformed packing.
7.
Remove elbow (12) and preformed packing (13) from brake (8). Discard preformed packing.
8.
Remove four brake bleeders (14) from four elbows (15). Remove four elbows and preformed packings (16) from two
brakes (8). Discard preformed packings.
9.
Remove six screws (5) and washers (6) from two brakes (8). Separate brake halves of each brake.
0373 00-2
