TM 9-2350-247-20-2
REPLACE PIVOT STEERING BRAKE ASSEMBLY (M548A1)
THIS WORK PACKAGE COVERS:
Removal (page 0373 00-1).
Installation (page 0373 00-3).
INITIAL SETUP:
Maintenance Level
References
Unit
See your -10
See your -PMCS
Tools and Special Tools
General Mechanic's Tool Kit (WP 0541 00, Item 57)
Torque Wrench (WP 0541 00, Item 69)
Equipment Condition
Materials/Parts
Hydraulic fluid (WP 0542 00, Item 18)
Engine stopped (see your -10)
Sealing compound (WP 0542 00, Item 36)
Carrier blocked (see your -10)
Preformed packing (2)
Right and left center seat floor plates raised
Preformed packing (6)
(WP 0394 00)
Suitable container
Throttle floor plate removed (WP 0394 00)
Personnel Required
Unit Mechanic
Cab left floor plate removed (WP 0394 00)
REMOVAL
NOTE
Place containers under brake bleeders.
1.
Open four brake bleeders (1). Operate hand lever (2) and hand lever (3) until two hydraulic cylinders (4) have been
drained.
2.
Remove quick disconnect coupler (5) from elbow (6) and hose (7). Disconnect coupler and remove preformed packing
(8). Discard preformed packing.
