TM 9-2350-247-20-2
REPLACE PIVOT STEERING BRAKE HOSES/TUBES/FITTINGS (M548A1) -- Continued
0372 00
INSTALLATION
NOTE
Clean threads. Put sealing compound sparingly on outside tapered threads at assembly.
1.
Install four brake bleeders (1) in four elbows (2). Install four elbows and new preformed packings (3) in two brakes (4).
2.
Install new preformed packing (5) and elbow (6) in brake (4). Install new preformed packing and inlet tee (7) in brake.
Install tube (8) on inlet tee. Install brake crossover tube (9) on inlet tee and elbow.
3.
Install tubing strap (10) on brake (4). Secure tube (8) with washer (11) and screw (12).
4.
Install elbow (13) and elbow (14) on tubes (8).