TM 9-2350-247-20-2
REVERSE T150 TRACK DRIVE SPROCKET AND TRACK ASSEMBLY -- Continued
0357 01
INSTALLATION
WARNING
Hanging loads, heavy parts, and overhead equipment can fall unexpectedly. Falling loads can
kill or seriously injure personnel
Keep away from hanging loads, heavy parts, and overhead equipment. Use correct lifting
devices to move hanging loads and heavy parts. Always have a helper guide you. Keep hands
and feet out of confined spaces from which heavy loads are being installed or removed.
1.
Move sprocket (1) to opposite side of vehicle. Install sprocket (1) on final drive (2). Secure with 10 screws (3). Repeat
for other side of vehicle. Have helper assist.
2.
TIGHTEN 10 SCREWS (3) TO 170-190 LB-FT (231-258 NM) TORQUE. Use torque wrench.
3.
Reverse track direction. Use towing vehicle (see your -10).
4.
Align tracks in front of vehicle. Tow disabled vehicle onto tracks. Use towing vehicle (see your -10).
Change 1
