TM 9-2350-247-20-2
REPLACE T130 TRACK DRIVE SPROCKETS, CUSHIONS, AND CARRIER
0357 00
ASSEMBLY -- Continued
5.
Place track (8) on drive sprocket carrier assembly (5).
FOLLOW-THROUGH STEPS
1.
Connect track (see your -10).
2.
Adjust tension (see your -10).
3.
Road test carrier (WP 0128 00) to check that drive sprocket and carrier assembly are installed properly.
4.
After road test, check rotation of cushion with respect to drive sprockets. Measure from the outer edge of the cushion.
Replace cushion that rotates beyond 1-1/2 inches (4 cm) of initial position.
5.
Install front step (WP 0419 00).
.
END OF TASK
0357 00-3/4 blank
Change 1
