TM 9-2350-247-20-2
REPLACE THROTTLE VALVE MODULATOR AND LEVER (M548A3) -- Continued
0203 00
INSTALLATION
NOTE
Apply light coat of sealing compound to male threads before installation. Do not coat leading
thread.
1.
Install new preformed packing (6) and throttle valve modulator (4) in transmission (5).
CAUTION
If preformed packing comes with throttle valve modulator, discard packing. The packing is not
required because there is an oil seal already installed inside the transmission, and the packing
does not allow for proper fit of the modulator into the transmission.
NOTE
Make sure modulator is in idle position before installing new modulator on transmission.
2.
Install modulator retainer (3), washer (2), and new self-locking bolt (1) in transmission (5).