TM 9-2350-247-20-2
ADJUST THROTTLE VALVE (TV) MODULATOR (M548A3) -- Continued
0204 00
ADJUSTMENT
1.
Make sure throttle valve modulator lever (1) is in idle position.
2.
Adjust two nuts (2) until cable modulator bracket (3) is located near midrange of threaded portion of cable housing (4).
Tighten nuts.
NOTE
Steps 3 - 15 are an initial adjustment prior to FIELD OPERATIONAL TEST.
3.
Make sure anchor (5) is 4 7/16-4 9/16 inches (11-12 cm) from cable modulator bracket (3). If adjustment is needed,
loosen nut (6) and reposition throttle valve modulator lever (1) by adjusting nut (7) and nut (8) until anchor (5) is located
near midrange of threaded portion of cable end (9). Tighten nut (6), nut (7), and nut (8).
