TM 9-2350-247-20-2
REPLACE THROTTLE VALVE MODULATOR AND LEVER (M548A3) -- Continued
0203 00
3.
Install lever (7) in throttle shaft (8). Secure with screw (9), two washers (10), and new lock nut (11).
4.
Install nut (12) and anchor (13) on cable (14).
5.
Install anchor (13) with cable (14) in lever (7). Secure with washer (15) and new lock nut (16).
6.
Install nut (17) on cable (14).
7.
Tighten jam nut (1) on cable (2) 4-7/16 to 4-9/16 inch (11.3 to 11.6 cm) from bracket (3) to end of shield covering inner
cable.
8.
FOLLOW-THROUGH STEPS
1.
Lower center seat (see your -10).
END OF TASK
0203 00-4