TM 9-2350-247-20-2
REPLACE AIR BOX HEATER HOSES, TUBES, AND FITTINGS (M548A1)
THIS WORK PACKAGE COVERS:
Removal (page 0180 00-1).
Installation (page 0180 00-3).
INITIAL SETUP:
Maintenance Level
References
Unit
See your -10
Tools and Special Tools
Equipment Condition
General Mechanic's Tool Kit (WP 0541 00, Item 57)
Engine stopped (see your -10)
Carrier blocked (see your -10)
Materials/Parts
Battery negative lead disconnected (WP 0292 00)
Sealing compound (WP 0542 00, Item 37)
Power plant rear access cover/door removed
Personnel Required
(see your -10)
Unit Mechanic
Center seat raised (see your -10)
REMOVAL
NOTE
Remove tubes and hoses with clamps attached. Attach clamps to replacement hoses and tubes.
1.
Remove hose (1) from fuel tee (2).
2.
Remove two screws (3), washers (4), and clamps (5) that secure hose (1) to engine.
3.
Disconnect hose (1) from solenoid valve elbow (6). Remove elbow (6) and adapter (7) from solenoid valve (8).
4.
Remove fuel tube (9) from elbow (10) and elbow (11). Remove elbow (10) from solenoid valve (8) and elbow (11) from
air box heater (12).
