TM 9-2350-247-20-2
REPLACE PRIMARY AND SECONDARY FUEL FILTER ELEMENTS
(M548A1)
THIS WORK PACKAGE COVERS:
Removal (page 0179 00-1).
Installation (page 0179 00-2).
INITIAL SETUP:
Maintenance Level
Personnel Required
Unit Mechanic
Unit
References
Tools and Special Tools
See your -10
General Mechanic's Tool Kit (WP 0541 00, Item 57)
Equipment Condition
Materials/Parts
Engine stopped (see your -10)
Cleaning compound (WP 0542 00, Item 9)
Carrier blocked (see your -10)
Battery negative lead disconnected (WP 0292 00)
Sealing compound (WP 0542 00, Item 37)
Generator field switch removed (WP 0288 00)
Diesel fuel
Left grille removed (WP 0390 00)
Gasket
Center seat raised (see your -10)
REMOVAL
1.
Remove screw (1) and washer (2). Separate primary filter shell (3) from primary filter cover (4) or secondary filter shell
(5) from secondary filter cover (6).
2.
Remove gasket (7) and filter element (8) and filter element (9) from primary filter shell (3) or secondary filter shell (5).
Discard gasket.
3.
If needed, disassemble secondary filter shell (5) by removing retainer (10), seal (11), two washers (12), and spring (13).
