TM 9-2350-287-20-1
7-75. DRIVER’S BULKHEAD TO ENGINE DISCONNECT STE/lCE WIRING HARNESS
(12329994) REPLACEMENT (continued).
8.
Install ground lead W (10) and ground cable 7 (18) on chassis ground connection (19) with screw (16) and
two washers (17).
9.
Install current shunt lead BB (11) and current shunt lead BA (15) on shunt (14) with two screws (13) and new
Iockwashers (12).
10.
Install gasket (7), bulkhead receptacle (6), and STE/lCE wiring harness (5) on bulkhead disconnect (8) with
four screws (1), washers (2), new Iockwashers (3), and nuts (4).
FOLLOW-ON MAINTENANCE:
l Connect battery ground cables (para 7-41).
l Close driver’s hatch cover (refer to TM 9-2350-287-10).
7-232
11.
Connect connector (9) to driver's bulkhead receptacle (6).
