TM 9-2350-287-20-1
7-75. DRIVER’S BULKHEAD TO ENGINE DISCONNECT STE/lCE WIRING HARNESS
(12329994) REPLACEMENT (continued).
8.
Disconnect plug (46) from engine electrical disconnect receptacle (45).
9.
Remove three screws (42), Iockwashers (43), washers (44), and retaining straps (34) from three standoffs
(33). Discard Iockwashers.
10.
Remove harness 12329994 from vehicle. Inspect harness for frays, cracks, and breaks. Repair harness if
damaged.
b.
1.
2.
3.
4.
5.
6.
7.
INSTALLATION
Install harness 12329994 in vehicle.
Install three retaining straps (34) on three standoffs (33) with screws (42), new Iockwashers (43), and washers
(44).
Connect plug (46) to engine electrical connect receptacle (45).
Remove screw (35), washer (41), cable (37), and ground lead Z (39) from standoff (38).
Install cable (37) and ground lead Z (39) on standoff (38) with screw (35), washer (41), alternator ground lead
(36), and new Iockwasher (40).
Connect lead AW (29) to connector (32) and lead AV (30) to connector (31).
Install cable 49(27), STE/lCE lead 10-R (24), cable 62 (25), cable 81 (23), STE/lCE lead 10-V (22), and cable
2B (21) on battery terminal (28) with nut (20) and screw (26).
7-231
