7-61. DRIVERS INSTRUMENT PANEL WIRING HARNESS (12268104) REPLACEMENT

b. INSTALLATION - TM-9-2350-287-20-1_888

b. INSTALLATION - TM-9-2350-287-20-1_890

TM-9-2350-287-20-1 Carrier Ammunition Tracked M992A21 (2350-01-352-3021) EIC:AE6 Manual
Page Navigation
861

TM 9-2350-287-20-1 7-61. DRIVER’S INSTRUMENT PANEL WIRING HARNESS (12268104) REPLACEMENT. This Task Covers: a. Removal b. Installation Initial Setup: Tools/Test Equipment: l Battery ground cables disconnected General mechanic’s tool kit (Item 24, (para 7-41). Appendix I) l Driver's portable instrument panel removed (para 7-6). Materials/Parts: Electrical insulation tape (Item 67, Appendix D) Equipment Conditions: Vehicle parked on level ground (refer to TM 9-2350-287-10). a. 1. 2. 3. 4. 5. 6. 7. 8. 9. REMOVAL Unfasten six screws (1) and pull driver’s instrument panel (3) forward from mount (2) to gain access to back of panel (3). Disconnect lead No. 450 (4) from bottom terminal of bilge pump switch (5). Disconnect lead No. 10 (6) from bottom terminal of glow plug switch (7). Disconnect lead No. 588 (8) from top terminal of fuel pump prime switch (9) Disconnect lead No. 10(1 O) from bottom terminal of starter switch (11 ). Disconnect leads No. 459A and No. 509E (21 and 17) from leads No. 459A and No. 509E (20 and 18) of wiring harness (19). Disconnect lead No. 450 (23) from circuit breaker No. 2 (13) on circuit breaker panel No. 1 (12). Disconnect lead No. 588 (22) from circuit breaker No. 4 (14) on circuit breaker panel No. 1 (12). Disconnect lead No. 10 (16) from circuit breaker No. 7 (15) on circuit breaker panel No. 1 (12). 7-191

Privacy Statement
Press Release
Contact