TM 9-2350-287-20-1
7-59. DRIVER’S BULKHEAD TO SLAVE RECEPTACLE WIRING HARNESS (12376573)
REPLACEMENT (continued).
5.
Remove four screws (14), Iockwashers (15), washers (16), and straps (17) from hull. Discard Iockwashers.
6.
Remove wiring harness
7.
Remove wiring harness
b.
INSTALLATION
1.
2.
3.
12376573 (4) from four straps (17).
12376573 (4) from vehicle.
Route wiring harness 12376573 (4) in vehicle and place in four straps (17). Secure straps (17) to hull with
four screws (14), new Iockwashers (15), and washers (16).
Connect lead 49B (10) to bottom terminal of
slave receptacle (13) with new Iockwasher
(11) and screw (12).
Push insulation sleeving (9) over leads 49B
and 50B (10 and 8) on slave receptacle (13).
7-187
