7-54. RECTIFIER TO REGULATOR WIRING HARNESS (12376406) REPLACEMENT.

b. INSTALLATION - TM-9-2350-287-20-1_860

b. INSTALLATION - TM-9-2350-287-20-1_862

TM-9-2350-287-20-1 Carrier Ammunition Tracked M992A21 (2350-01-352-3021) EIC:AE6 Manual
Page Navigation
833

TM 9-2350-287-20-1 7-54. RECTIFIER TO REGULATOR WIRING HARNESS (12376406) REPLACEMENT. This Task Covers: a. Removal b. Installation Initial Setup: Tools/Test Equipment: Equipment Conditions: General mechanic's tool kit (Item 24, Vehicle parked on level ground (refer to Appendix I). TM 9-2350-287-10). MASTER switch set to OFF (refer to Materials/Parts: TM 9-2350-287-10). Tape, insulation, electrical (Item 67, Appendix D) Battery ground cables disconnected (para 7-41). a. REMOVAL 1. Disconnect cable connector (2) from rectifier assembly (1). 2. Disconnect connector (3) from voltage regulator (4). 3. Disconnect two connectors (6) from two STE/ICE harness connectors (5). 4. Remove terminal (7) and nut (9) from positive post (8) of forward battery group. 5. Remove terminal (11) and nut (12) from positive post (10) of rear battery group. 6. Remove rectifier-to-regulator wiring harness 12376406 from vehicle. Change 1 7-163

Privacy Statement
Press Release
Contact