TM 9-2350-287-20-1
7-42. BATTERY GROUND AND INTERCONNECTING CABLES (10897992, 10897993,
12330348) REPLACEMENT.
This Task Covers:
a.
Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
l Battery terminal puller (Item 6, Appendix 1)
l Vehicle parked on level ground (refer to
l General mechanic’s tool kit (Item 24,
TM 9-2350-287-10).
Appendix l)
l MASTER switch set to OFF (refer to
TM 9-2350-287-10).
Materials/Parts:
l Battery access doors opened (refer to
l Lockwasher (4) (Item 138, Appendix H)
TM 9-2350-287-10).
l Lockwasher (4) (Item 149, Appendix H)
a.
REMOVAL
WARNING
l Battery acid (electrolyte) is extremely harmful. Always wear safety goggles and
rubber gloves, and do not smoke when performing maintenance on batteries, Injury
will result if acid contacts skin or eyes. Wear rubber apron to prevent clothing being
damaged.
l Remove all jewelry such as rings, identification tags, bracelets, etc. If jewelry
contacts battery terminal, a direct short may result in instant heating of tools,
damage to equipment, and injury or death to personnel.
l Make sure MASTER switch is set to OFF before working on electrical system. Failure
to follow this warning may result in electrical shock to personnel.
NOTE
There are two locations for mounting leads (10897992) to hull grounds.
7-115
