TM 9-2350-287-20-1
7-40. TRANSMISSlON OIL PRESSURE TRANSMITTER AND OIL LOW PRESSURE SWITCH
REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
l General mechanic’s tool kit (Item 24,
l Vehicle parked on level ground (refer to
Appendix l)
TM 9-2350-287-10).
l Air intake grille opened and secured
Materials/Parts:
(refer to TM 9-2350-287-10).
l Teflon pipe sealant (Item 63, Appendix D)
a.
REMOVAL
WARNING
A hot engine may cause severe burns
or injury to personnel. Make sure
engine has cooled before removing
switch.
NOTE
l Perform steps 1 and 2 only if
removing transmission oil pressure
transmitter.
l Perform steps 3 and 4 only if
removing transmission oil low
pressure switch.
1.
Disconnect wire 321 from electrical
connector (1) of transmission oil pressure
transmitter (2).
2.
Unscrew and remove transmission oil
pressure transmitter (2) from vehicle.
3.
Disconnect wire 509C from electrical
connector (4) of transmission low oil
pressure switch (3).
4.
Unscrew and remove transmission
pressure switch (3) from vehicle.
low oil
7-111
