TM 9-2350-287-20-1
7-39. TRANSMISSION OIL TEMPERATURE TRANSMITTER AND OIL HIGH TEMPERATURE
SWITCH REPLACEMENT (continued).
b.
lNSTALLATION
WARNING
Sealing compounds can burn easily, can give off harmful vapors, and are harmful to
skin and clothing. To avoid injury or death, keep away from open firs and use in a well-
ventilated area. if sealing compound gets on skin or clothing, wash immediately with
soap and water.
1.
Apply sealing compound to threads of transmission oil high temperature switch (4), and install transmission
oil high temperature switch (4) in vehicle.
2.
Apply sealing compound to threads of transmission oil temperature transmitter (5), and install transmission
oil temperature transmitter (5) in vehicle.
3.
Install wires on two electrical connectors (6 and 7) through bracket (1).
4.
Connect wire 509D to electrical connector (7) of transmission oil high temperature switch (4).
5.
Connect wire 324 to electrical connector (6) of transmission oil temperature transmitter (5).
6.
Secure bracket (1) to transmission with two screws (3) and new Iockwashers (2).
FOLLOW-ON MAINTENANCE:
l Close and secure right transmission access
door (refer to TM 9-2350-287-10).
7-110
