7-41. BATTERY REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment
References: TM 9-140-200-14
l General mechanic’s tool kit (Item 24,
Appendix l)
Equipment Conditions:
l Battery terminal puller (Item 6, Appendix l)
l Vehicle parked on level ground (refer to
TM 9-2350-287-10).
Materials/Parts:
l MASTER switch set to OFF (refer to
l Lockwasher (8) (Item 177, Appendix H)
TM 9-2350-287-10).
a.
REMOVAL
1.
2.
3.
4.
l
l
When removing batteries, always disconnect ground cables first. Failure to do so
may result in injury or death to personnel.
Batteries can emit gases that explode. Do not smoke, have open flame, or make
sparks around batteries. Batteries emitting gases can explode, causing injury or
death to personnel.
NOTE
Remove cables with terminal
lugs attached.
Loosen two nuts (3), on two battery
terminals (2).
Using battery terminal puller, remove
ground cables (1 and 5), and two
battery terminals (2) from two battery
terminal posts (4).
Loosen six nuts (6), on six battery
terminals (7).
Using battery terminal puller, remove
six battery terminals (7) from six
terminal posts (8).
7-113
TM 9-2350-287-20-1
