6-6. RADIATOR AND MOUNTS REPLACEMENT

b. INSTALLATION - TM-9-2350-287-20-1_678

b. INSTALLATION - TM-9-2350-287-20-1_680

TM-9-2350-287-20-1 Carrier Ammunition Tracked M992A21 (2350-01-352-3021) EIC:AE6 Manual
Page Navigation
653

TM 9-2350-287-20-1 6-6. RADIATOR AND MOUNTS REPLACEMENT. This Task Covers: a. Removal b. Installation Initial Setup: Tool/Test Equipment: General mechanic’s tool kit (Item 24, Appendix I) Materiais/Parts: Adhesive (Item 1, Appendix D) Bushing (2) (Item 6, Appendix H) LockWasher (20) (Item 177, Append H) LockWasher (2) (Item 179, Appendix H) Personnel Required: Two Equipment Conditions: Vehicle parked on level ground (refer to TM 9-2350-287-10). NOTE PowerPack must be removed to replace radiator mounts. PowerPack removed (para 3-2). Cooling system drained (refer to TM 9-2350-287-1 0). a. REMOVAL 1. Loosen clamp (1) and remove hose (15) from radiator (6). 2. Loosen clamp (2) and remove hose (14) from radiator (6). 3. Remove two screws (8), lockwashers (9), washers (1 O) and resilient mounts(11 ) from either side of radiator (6). Discard Iockwashers. 4. Loosen outlet hose clamp (13) and remove radiator outlet hose (12) from radiator (6). 5. Loosen two vent hose clamps (4) and remove two radiator vent hoses (3) from radiator (6). 6. Loosen inlet hose clamp (5) and remove radiator inlet hose (7) from radiator (6). WARNING Radiator is very heavy. To prevent injury to personnel, two persons are required when removing radiator from vehicle. 7. Lift radiator (6) up and away from radiator shroud. 6-13

Privacy Statement
Press Release
Contact