TM 9-2350-287-20-1
4-6.
PERSONNEL HEATER FUEL PUMP REPLACEMENT (continued).
b.
1.
2.
3.
4.
5.
6.
INSTALLATION
WARNING
Adhesives and sealing compounds can burn easily and can give off harmful vapor. To
avoid injury, keep adhesives and sealing compounds away from open fire and use in
a well-ventilated area.
Apply thin coat of Teflon pipe sealant to threads of adapters (7 and 9).
Install adapters (7 and 9) in fuel pump (12).
Position fuel pump (12) and clamp (4) on forward bulkhead (3) and secure with two screws (6) and new
Iockwashers (5).
Install fuel inlet quick-disconnect hose (2) to adapter (9) and fuel filter hose (8) to adapter (7),
Connect electrical connector (10) to fuel pump connector (11 ).
Install fuel inlet quick-disconnect hose (2) to tee (1).
FOLLOW-ON MAINTENANCE:
• Perform operational check of heating and ventilating system (refer to TM 9-2350-287-10).
• Install numbers 1 and 2 engine AFES cylinder bottle bracket straps, brackets, and mounts (para 21-8).
• Install numbers 1 and 2 engine AFES cylinder bottles (para 21-4).
• Install left and right projectile rack assemblies (refer to TM 9-2350-287-10).
4-15
