2-22. SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION
ENGINES (STE/ICE) (continued).
b. STE/lCE TROUBLESHOOTING - (continued).
(6) GENERATOR FIELD VOLTAGE - TEST 83.
(continued)
Continued from step A
B.
1. Shut down engine (refer to TM 9-2350-287-
10).
2. Turn MASTER switch to OFF (refer to TM 9-
2350-287-10).
3. Disconnect harness 12329994 lead AV from
harness 12376408 lead AV.
4. Install 3-way connector between harness
12329994 lead AV and harness 12376408 lead
AV.
5. Place red lead in open socket of 3-way con-
nector and black lead to ground.
6. Turn MASTER switch to ON (refer to TM 9-
2350-287-10).
7. Enter 89 into TEST SELECT and press TEST.
8. Start engine (refer to TM 9-2350-287-10)
and read voltage on VTM.
Is battery voltage present?
Go to para 2-19.i(1)
Do test 0184 (para 2-22.b(1)). If results are
good, replace voltage regulator (para 7-3).
Continued from step A
C. Do individual test 75 (para 2-22.b(4)), test 73
(para 2-22.b(3)), and test 89 (para 2-22.b(20)).
Are batteries good?
Replace faulty batteties (para 7-41).
END OF TASK
2-415
TM 9-2350-287-20-1
Make sure battery cables are clean
and serviceable (refer to TM 9-2350-
287-10). Go to 2-19.i(1)).
