(6) GENERATOR FIELD VOLTAGE

(5) STARTER NEGATIVE CABLE DROP - TEST 69

SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINES (STE/ICE) (continued). - TM-9-2350-287-20-1_467

TM-9-2350-287-20-1 Carrier Ammunition Tracked M992A21 (2350-01-352-3021) EIC:AE6 Manual
Page Navigation
443

TM 9-2350-287-20-1 2-22. SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINES (STE/lCE) (continued). b. STE/lCE TROUBLESHOOTING - (continued). (6) GENERATOR FIELD VOLTAGE - TEST 83. Tools/Test Equipment: Equipment Conditions: l Electrical connector repair tool kit (Item 16, • Air intake grille opened (refer to Appendix I) TM 9-2350-287-10). • General mechanic’s tool kit (Item 24, Appendix I) • Battery compartment access doors opened • STE/lCE test set (item 65, Appendix I) (refer to TM 9-2350-287-10). A. 1. Connect DCA cable W1 connector P1 to VTM connector J1. 2. Connect DCA cable W1 to harness 12329996 connector at DCA receptacle in driver's compartment. 3. Push power switch on VTM to ON position. 4. Do confidence test 66/99 (para 2-22.a(1)). 5. Dial 60 into TEST SELECT. 6. Press and release TEST button. Message “VEH” should be displayed on the VTM. 7. Enter the vehicle ID number 11. 8. Start engine (refer to TM 9-2350-287-10). 9. Turn on headlights and accessories to load charging system (refer to TM 9-2350-287-10). 10. Increase engine speed between 1000 and 1200 RPM. 11. Enter 83 into TEST SELECT. 12. Press and release TEST button. 13. Record test results (Limits maximum 22 vdc). Are results higher than 22 vdc? Continued to step B 2-414

Privacy Statement
Press Release
Contact