TM 9-2350-277-34
REPAIR ROADSIDE DC POWER EXTENSION BOX A9 (M1068A3 ONLY) — Continued
0098 00
ASSEMBLY
NOTE
See wiring diagram page 0098 00–4 for assemble/disassemble of wires to connectors.
1.
Install connector J23 (17) on cover (2) with dustcap (13), secure with four screws (15) and new locknuts (16).
2.
Install four connectors J18-J21 (14) on cover (2) with dust caps (13), secure with sixteen screws (11) and new
locknuts (12).
3.
Install connector J2 (10) on extension box (4), secure with four screws (8) and new locknuts (9).
4.
Install connector J1 (7) on extension box (4), secure with four screws (5) and new locknuts (6).
5.
Connect leads to connectors if necessary.
6.
Install cover (2) on extension box (4) with gasket (3) and secure with four screws (1).
0098 00-3
