VEHICLE BATTERIES DISCHARGE WITH EXTERNAL AC POWER APPLIED (M1068A3 ONLY)

VEHICLE BATTERIES DISCHARGE WITH EXTERNAL AC POWER APPLIED (M1068A3 ONLY) - TM-9-2350-277-34_44

VEHICLE BATTERIES DISCHARGE WITH EXTERNAL AC POWER APPLIED (M1068A3 ONLY) - TM-9-2350-277-34_46

TM-9-2350-277-34 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
20

TM 9-2350-277-34 VEHICLE BATTERIES DISCHARGE WITH EXTERNAL AC POWER APPLIED (M1068A3 ONLY)—Continued 0007 00 4Y 1. Disconnect Special Purpose Power Cable (1) from external AC power and from J24 (2) on Power Control Enclosure. 2. Install all circuits (3) on power supplies PS1 (4) and PS2 (5). 3. Remove 10 screws (6) and lockwashers (7) and lower faceplate (8) of Power Control Enclosure. Discard lockwashers. 4. Undo velcro strap (9) securing safety cover (10) over the inside of the faceplate (8). Open safety cover (10). 5. Measure resistance between PS1 (+) OUTPUT terminal (11) and DC bus bar at terminal 1 (12) of circuit breaker CB15 (13). 6. Does multimeter read 0 ohms? YES NO 4YN 1. Replace circuit 31E (WP 0090 00) and See your -20. 2. Verify no faults found. 0007 00-5

Privacy Statement
Press Release
Contact