VEHICLE BATTERIES DISCHARGE WITH EXTERNAL AC POWER APPLIED (M1068A3 ONLY)

VEHICLE BATTERIES DISCHARGE WITH EXTERNAL AC POWER APPLIED (M1068A3 ONLY) - TM-9-2350-277-34_46

VEHICLE WILL NOT ACCEPT EXTERNAL AC POWER (M1068A3 ONLY) - TM-9-2350-277-34_49

TM-9-2350-277-34 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
22

TM 9-2350-277-34 VEHICLE BATTERIES DISCHARGE WITH EXTERNAL AC POWER APPLIED (M1068A3 ONLY)—Continued 0007 00 6Y 1. Remove cable W4 plug P1 (1) from Power Control Enclosure jack J25 (2). 2. Measure resistance between power supply PS2 (-) OUTPUT terminal (3) and jack J25 (2) outer sleeve. 3. Does multimeter read 0 ohms? YES NO 6YN 1. Replace circuit 32E (WP 0090 00) and (WP 0092 00). 2. Install cable W4 plug P1 (1) on Power Control Enclosure jack J25 (2). 3. Raise faceplate (4) and secure to Power Control Enclosure with ten new lockwashers (5) and screws (6). 4. Verify no faults found. 7Y 1. Install cable W4 plug P1 (1) on Power Control Enclosure jack J25 (2). 2. Raise faceplate (4) and secure to Power Control Enclosure with ten new lockwashers (5) and screws (6). 3. Verify no faults found. 0007 00-7/8 blank

Privacy Statement
Press Release
Contact