TM 9-2350-277-34
REPAIR CARGO HATCH HINGE (M113A3, M901A3, M981A3 AND M1059A3 ONLY)
Continued
0048 00
2.
Make sure hinges are alined and spaced as shown.
3.
Weld hinge (3) or (4) to hatch. See TM 9-237. Use electrode type 5356.
4.
Clean weld area and apply touch-up paint to repaired area. See TM 43-0139. Install rubber seal (1) along edge of
hatch (2).
FOLLOW-THROUGH STEPS
1.
Install cargo hatch on carrier (see your -20).
END OF TASK
0048 00-3/4 blank