TM 9-2350-277-34
REPAIR POWER PLANT DOOR HINGE — Continued
0047 00
INSTALLATION
1.
Tack weld hinge (2) or (3) to door (4). Recheck measurement shown before completing required weld.
2.
Complete weld on new hinge. See TM 9-237. Use electrode 5356.
3.
Clean the weld area and apply touch-up paint to repaired area. See TM 43-0139.
FOLLOW-THROUGH STEPS
1.
Install door on carrier (see your -20).
2.
Install seal on hinge edge of door (see your -20).
END OF TASK
0047 00-3/4 blank
