TM 9-2350-277-34
REPLACE CHASSIS TURRET WIRING HARNESS W8 (M901A3 ONLY) — Continued
0032 00
WARNING
To prevent injury to personnel, verify that all grenades have been removed from smoke grenade
discharger before removing components.
4.
Remove three screws (1) and washers (2) securing smoke grenade discharger (3) to mounting base (4). Pull away
discharger (3) and disconnect wiring harness (5). Remove discharger (3).
5.
Remove four screws (6), lockwashers (7) and washers (8) securing brush guard (9) to hull. Remove brush guard. Discard
lockwashers.
6.
Remove three screws (10), washers (11) and mounting base (4) from hull.
7.
Disconnect wiring harness (5) from hull connector (12). Remove wiring harness.
8.
Remove jamnut (13) from connector (12) in hull. Let connector fall inside driver’s compartment.
9.
Remove four screws (14), lockwashers (15), washers (16), mounting plate (17) and gasket (18). Discard lockwashers.
0032 00-2
