REPLACE CHASSIS TURRET WIRING HARNESS W8 (M901A3 ONLY) Continued

REPLACE CHASSIS TURRET WIRING HARNESS W8 (M901A3 ONLY) Continued - TM-9-2350-277-34_262

REPLACE CHASSIS TURRET WIRING HARNESS W8 (M901A3 ONLY) Continued - TM-9-2350-277-34_264

TM-9-2350-277-34 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
219

TM 9-2350-277-34 REPLACE CHASSIS TURRET WIRING HARNESS W8 (M901A3 ONLY) — Continued 0032 00 16. Remove eight screws (9), lockwashers (10) and clamps (11) from wiring harness (6). Discard lockwashers. 17. Remove four screws (1), lockwashers (2), washers (3), and cable guard (4) securing connector W8J1 (5) to floor near left bulkhead. Disconnect connector W8J1 from turret slip ring wiring harness connector. Discard lockwashers. 18. Cut safety wire securing connector W8J1 (5) to screw (6). Remove screw (6), three screws (7), four lockwashers (8), eight washers (9), four nuts (10) and connector W8J1 (5) from bracket (11). Discard lockwashers. 19. Remove two screws (12), lockwashers (13), washers (14), clamps (15) and wiring harness (16) from left bulkhead. Discard lockwashers. 20. Remove screw (17), lockwasher (18), washer (19) and clamp (20) securing smoke grenade arming/firing unit lead W8P1 (21) to rear engine compartment bulkhead. Discard lockwasher. 0032 00-5

Privacy Statement
Press Release
Contact