TM 9-2350-277-34
REPLACE CHASSIS TURRET WIRING HARNESS W8 (M901A3 ONLY) — Continued
0032 00
25. Remove wiring harness (11) from carrier.
INSTALLATION
NOTE
Layout wiring harness inside carrier.
1.
Connect wiring harness lead W8P5 (1) to cargo hatch closed proximity switch (2).
2.
Connect wiring harness lead W8P1 (3) to arming/firing unit connector (4).
3.
Connect wiring harness lead W8P3 (5) to cargo hatch full open proximity switch (6).
4.
Position connector W8J1 (7), on bracket (8). Secure with screw (9), three screws (10), four new lockwashers (11), eight
washers (12) and four nuts (13).
5.
Safety wire connector W8J1 (7) to screw (9) per MS33540.
6.
Connect turret slip ring wiring harness connector to connector W8J1 (7).
0032 00-7
